기본 콘텐츠로 건너뛰기

리튬 배터리 FAQ (4). Posted by batterymanufactory.com

(1). What is the IEC standard? What are the common standards for the battery?


 리튬 배터리

 IEC International Electrical Commission (International Electrical Commission), is a worldwide standardization organization composed of national electrician committee, the purpose is to promote the standardization in the field of electrician and electronic in the world, among them the standard about nickel-cadmium battery is IEC285, The standard is IEC61436, IEC standard lithium-ion battery, the general battery industry is based on SANYO or Panasonic standards.

 Common IEC standards for batteries are: nickel-cadmium batteries for the standard IEC602851999; nickel-metal hydride batteries for the IEC614361998.1; lithium battery standards IEC619602000.11.

 Common national standards for batteries are: nickel-cadmium batteries for the standard GB / T11013-1996GB / T18289-2000; nickel-metal hydride batteries for the standard GB / T15100-1994GB / T18288-2000;

 The standard lithium battery is GB / T10077-1998YD / T998-1999, GB / T18287-2000.

 In addition the battery standard commonly used in Japan's industry standard JIS C standard on the battery and SANYOPANASONIC companies on the battery business standards.


(2). What is the IEC standard cycle life test


 IEC standard nickel-cadmium and nickel-metal hydride batteries standard cycle life test:

 Battery to 0.2C to 1.0V / support after
   1. Charging at 0.1C for 16 hours and then at 0.2C for 2 hours and 30 minutes (one cycle).
   2. Charge at 0.25C for 3 hours and 10 minutes and discharge at 0.25C for 2 hours and 20 minutes (2-48 cycles).
   3. 0.25C charge 3 hours and 10 minutes to 0.25C to 1.0V (49th cycle)
   4. 0.1C charge 16 hours, set aside 1 hour, 0.2C discharge to 1.0V (50 cycles), the nickel-metal hydride batteries 1-4 repeat 400 cycles, the 0.2C discharge time should be greater than 3 hours; nickel Batteries repeat 1-4 a total of 500 cycles, the 0.2C discharge time should be greater than 3 hours.

 IEC standard lithium battery cycle life test:
 
Battery to 0.2C to 3.0V / branch, 1C constant current and constant voltage charge to 4.2V, cut-off current 20MA, set aside for 1 hour, then 0.2C discharge to 3.0V (one cycle) after repeated cycles of 500 times capacity In the initial capacity of more than 60%.

Tags:

Posted in 자주 묻는 질문 | 중국 리튬 폴리머 배터리 제조 업체, 리튬 이온 배터리, RC 사러 배터리 팩, 한 LiFePO4 배터리 팩 By

batterymanufactory.com

 BENZO 에너지 과학 기술 유한 회사



전화 번호   전화 번호：+86-755-84822012
전화 번호   전화 번호：+86-13538185686

E 메일   E 메일: contact@benzobattery.com
skype  Skype: benzobattery1231@gmail.com

사무실 주소   사무실 주소：  廣東省深圳市龍崗區阪田和成世紀名園
공장 주소   공장 주소：  廣東省東莞市清溪鎮羅馬路漢通科技園B1棟

         사이트：   bz-battery.en.alibaba.com   /   www.bz-battery.com

 

댓글

댓글 쓰기

이 블로그의 인기 게시물

스마트폰을 위한 어떤 종류의 배터리가 더 좋은가요? Li-Ion 또는 LiPo?

이미지
Did you ever think about why your phone works at all? Probably not. But, if you think about it, all portable gadgets rely on a battery to keep ticking – and some have better battery life than others. That’s why we’re going to take a peek at what keeps your phone ticking and why some batteries do better than others. On the basis of chemistry used for ions carrying electrolyte material, Lithium battery can be classified into Lithium ion and lithium Polymer. Lithium ion battery uses liquid lithium ion as electrolyte while lithium polymer use solid or gelatin like polymers as electrolyte. Lithium ion batteries have high energy density and cost less than lithium polymer. Lithium polymer batteries are light weight and have improved safety . However their cost is high (30% average) as compared to lithium ion. Also the the energy density of Li-Polymer battery compared to Li-Ion Batteries is quite less. Lithium ion batteries tend to lose charge with ageing even when not us...
자세한 내용 보기

What is KC certification? What are the requirements for the factory to pass the KC certification? Posted by batterymanufactory.com

이미지
What is KC certification? The KC (Korea Certification) certification mark signifies compliance with Korea’s product safety requirements for electrical and electronic equipment and components that utilise power from AC 50-1000V. The KC certification procedure for products includes the following steps: 1. Application - The application process involves the submission of an application form and product description. In addition, the manufacture must obtain a certificate of registration. 2. Factory inspection - Production equipment and processes are inspected and audited for compliance with applicable safety criteria. 3. Product testing - The product is tested consistent with the requirements of the applicable safety standard(s). 4. EMC testing - The product is tested for electromagnetic compatibility (EMC) and immunity. 5. Post-certification surveillance - Regular factory inspections and market surveillance are required to verify continued compliance following cer...
자세한 내용 보기

신기술로 인해 배터리가 코발트에서 분리 될 수 있습니다. Posted by batterymanufactory.com

이미지
Lithium-based batteries use more than 50 percent of all cobalt produced in the world. These batteries are in your cell phone, laptop and maybe even your car. About 50 percent of the world's cobalt comes from the Congo, where it's largely mined by hand, in some instances by children. But now, a research team led by scientists at the University of California, Berkeley, has opened the door to using other metals in lithium-based batteries, and have built cathodes with 50 percent more lithium-storage capacity than conventional materials. "We've opened up a new chemical space for battery technology," said senior author Gerbrand Ceder, professor in the Department of Materials Science and Engineering at Berkeley. "For the first time we have a really cheap element that can do a lot of electron exchange in batteries." The study will be published in the April 12 edition of the journal Nature. The work was a collaboration between scientists at...
자세한 내용 보기