기본 콘텐츠로 건너뛰기

3.7V 리튬 배터리를 충전하려면 얼마나 많은 전압을 사용해야합니까? Posted by batterymanufactory.com

Generally, a 3.7V lithium battery needs to have a "protection circuit board" for overcharging and overdischarging. If the battery does not have a protection circuit board, it can only be charged with a voltage of about 4.2V, because the ideal full charge voltage of a lithium battery is 4.2V. If the voltage is exceed 4.2V,  the battery may is damaged, it is necessary to monitor the condition of the battery at the same time when charging with this method.

3.7V 리튬 배터리 충전 방법


With the protection circuit board, you can use 5V to charge (4.8V to 5.2V can be used), the USB 5V charger of the computer or the 5V charger of the mobile phone can be used.

3.7V battery, charge cut-off voltage 4.2V, discharge cut-off voltage is 3.0V. Therefore, when the open circuit voltage of the battery is lower than 3.6V, it should be able to charge. It is best to use 4.2V constant voltage charging mode, you don't need to pay attention to the charging time. Charging with 5V is prone to danger of overcharging.

The usual lithium battery cell is 3.7V, the voltage is 4.2V when fully charged, and the nominal voltage after series connection is 7.4V, 11.1V, 14.8V...The corresponding full voltage (that is, the charger is no-load The output voltage) is 8.4V, 12.6V, 16.8V...

How to charge the 3.7V lithium battery?


Lithium batteries are most afraid of overcharging and overdischarging. Its charging needs to be divided into four processes: activation charging, constant current charging, constant voltage charging and trickle charging.

Activation charging: When the voltage is too low, a smaller current is required to activate and charge the lithium battery.

Constant current charging: After the voltage rises, it can be changed to constant current fast charging.

Constant voltage charging: When the voltage rises to 4.2V, it needs to be changed to 4.2V constant voltage charging, and the charging current gradually decreases.

Trickle charge: After fully charged, change to trickle charge to maintain the full charge of the lithium battery.

Tags:

Posted in News | 중국 리튬 폴리머 배터리 제조 업체, 리튬 이온 배터리, RC 사러 배터리 팩, 한 LiFePO4 배터리 팩 By

batterymanufactory.com

 

 

 BENZO 에너지 과학 기술 유한 회사

UFine Technology Co.,Ltd

 


전화 번호   전화 번호：+86-755-84822012

전화 번호   전화 번호：+86-13538185686


E 메일   E 메일: enzo@batterymanufactory.com

skype  Skype: benzobattery1231@gmail.com


사무실 주소   사무실 주소：  Building C1, Bantian International Center, BanTian Street, Longgang area, Shenzhen City, China

공장 주소   공장 주소 1：  Luoma Second Bridge, Tiansheng Lake Villager Group, Luoma Village, QingXi Town, DongGuan, China

공장 주소   공장 주소 2：  Building 41, Zhongnan HighTech Rongzhi Chuangmei Industrial Valley, Siqian Town, Xinhui District, Jiangmen City, Guangdong, China

 

         사이트：   www.batterymanufactory.com   /   www.bzbattery.com

 

댓글

댓글 쓰기

이 블로그의 인기 게시물

스마트폰을 위한 어떤 종류의 배터리가 더 좋은가요? Li-Ion 또는 LiPo?

이미지
Did you ever think about why your phone works at all? Probably not. But, if you think about it, all portable gadgets rely on a battery to keep ticking – and some have better battery life than others. That’s why we’re going to take a peek at what keeps your phone ticking and why some batteries do better than others. On the basis of chemistry used for ions carrying electrolyte material, Lithium battery can be classified into Lithium ion and lithium Polymer. Lithium ion battery uses liquid lithium ion as electrolyte while lithium polymer use solid or gelatin like polymers as electrolyte. Lithium ion batteries have high energy density and cost less than lithium polymer. Lithium polymer batteries are light weight and have improved safety . However their cost is high (30% average) as compared to lithium ion. Also the the energy density of Li-Polymer battery compared to Li-Ion Batteries is quite less. Lithium ion batteries tend to lose charge with ageing even when not us...
자세한 내용 보기

What is KC certification? What are the requirements for the factory to pass the KC certification? Posted by batterymanufactory.com

이미지
What is KC certification? The KC (Korea Certification) certification mark signifies compliance with Korea’s product safety requirements for electrical and electronic equipment and components that utilise power from AC 50-1000V. The KC certification procedure for products includes the following steps: 1. Application - The application process involves the submission of an application form and product description. In addition, the manufacture must obtain a certificate of registration. 2. Factory inspection - Production equipment and processes are inspected and audited for compliance with applicable safety criteria. 3. Product testing - The product is tested consistent with the requirements of the applicable safety standard(s). 4. EMC testing - The product is tested for electromagnetic compatibility (EMC) and immunity. 5. Post-certification surveillance - Regular factory inspections and market surveillance are required to verify continued compliance following cer...
자세한 내용 보기

신기술로 인해 배터리가 코발트에서 분리 될 수 있습니다. Posted by batterymanufactory.com

이미지
Lithium-based batteries use more than 50 percent of all cobalt produced in the world. These batteries are in your cell phone, laptop and maybe even your car. About 50 percent of the world's cobalt comes from the Congo, where it's largely mined by hand, in some instances by children. But now, a research team led by scientists at the University of California, Berkeley, has opened the door to using other metals in lithium-based batteries, and have built cathodes with 50 percent more lithium-storage capacity than conventional materials. "We've opened up a new chemical space for battery technology," said senior author Gerbrand Ceder, professor in the Department of Materials Science and Engineering at Berkeley. "For the first time we have a really cheap element that can do a lot of electron exchange in batteries." The study will be published in the April 12 edition of the journal Nature. The work was a collaboration between scientists at...
자세한 내용 보기