기본 콘텐츠로 건너뛰기

리튬 배터리 FAQ (1). Posted by batterymanufactory.com

A lithium-ion battery or Li-ion battery (abbreviated as LIB) is a type of rechargeable battery in which lithium ions move from the negative electrode to the positive electrode during discharge and back when charging. Li-ion batteries use an intercalated lithium compound as one electrode material, compared to the metallic lithium used in a non-rechargeable lithium battery. The electrolyte, which allows for ionic movement, and the two electrodes are the constituent components of a lithium-ion battery cell.
리튬 배터리

 

FAQ of Lithium Battery

1, the secondary battery performance mainly includes what aspects

Mainly include voltage, internal resistance, capacity, internal pressure, self-discharge rate, cycle life, sealing performance, safety performance, storage performance, appearance and so on, other overcharge, over discharge, weldability, corrosion resistance and so on.

2, the comparison of rechargeable batteries and alkaline batteries:

In most cases, nickel-metal hydride batteries can completely replace disposable batteries, especially when used in high-power equipment.
Although alkaline batteries have a rated voltage of 1.5 volts, the voltage drops continuously after the discharge starts. Looking at the entire discharge process, the average alkaline battery voltage is about 1.2 volts, and very close to the nickel-metal hydride batteries, the main difference is that the alkaline battery voltage at the start of 1.5 volts, and eventually dropped to less than 1.0 volts, and nickel-metal hydride batteries It will maintain a voltage of about 1.2 volts most of the time.

3, the reliability of the battery test What are the items

   1. Cycle life
   2 Different rate discharge characteristics
   3 Different temperature discharge characteristics
   4. Charging characteristics
   5. Self-discharge characteristics
   6. Different temperature self-discharge characteristics
   7. Storage characteristics
   8. Over discharge characteristics
   9. Different temperature resistance characteristics
   10. High temperature test
   11. Temperature cycling test
   12. Drop test
   13. Vibration test
   14. Capacity distribution test
   15. Internal resistance distribution test
   16. Static discharge test

4, the battery safety test What are the items

   1. Internal short circuit test
   2. Continuous charging test
   3. Overcharge
   4. High current charging
   5. Forced discharge
   6. Drop test
   7. Drop test from height
   8. Puncture experiment
   9. Plane crushing experiment
   10.Cutting experiment
   11. Low-pressure shelving test
   12. hot abuse experiment
   13. Water immersion test
   14. Burning experiment
   15. High-pressure experiment
   16. Baking experiment
   17. Electronic furnace experiment

Tags:

Posted in 자주 묻는 질문 | 중국 리튬 폴리머 배터리 제조 업체, 리튬 이온 배터리, RC 사러 배터리 팩, 한 LiFePO4 배터리 팩 By

batterymanufactory.com

 

 BENZO 에너지 과학 기술 유한 회사



전화 번호   전화 번호：+86-755-84822012
전화 번호   전화 번호：+86-13538185686

E 메일   E 메일: contact@benzobattery.com
skype  Skype: benzobattery1231@gmail.com

사무실 주소   사무실 주소：  廣東省深圳市龍崗區阪田和成世紀名園
공장 주소   공장 주소：  廣東省東莞市清溪鎮羅馬路漢通科技園B1棟

         사이트：   bz-battery.en.alibaba.com   /   www.bz-battery.com

 

댓글

댓글 쓰기

이 블로그의 인기 게시물

스마트폰을 위한 어떤 종류의 배터리가 더 좋은가요? Li-Ion 또는 LiPo?

이미지
Did you ever think about why your phone works at all? Probably not. But, if you think about it, all portable gadgets rely on a battery to keep ticking – and some have better battery life than others. That’s why we’re going to take a peek at what keeps your phone ticking and why some batteries do better than others. On the basis of chemistry used for ions carrying electrolyte material, Lithium battery can be classified into Lithium ion and lithium Polymer. Lithium ion battery uses liquid lithium ion as electrolyte while lithium polymer use solid or gelatin like polymers as electrolyte. Lithium ion batteries have high energy density and cost less than lithium polymer. Lithium polymer batteries are light weight and have improved safety . However their cost is high (30% average) as compared to lithium ion. Also the the energy density of Li-Polymer battery compared to Li-Ion Batteries is quite less. Lithium ion batteries tend to lose charge with ageing even when not us...
자세한 내용 보기

What is KC certification? What are the requirements for the factory to pass the KC certification? Posted by batterymanufactory.com

이미지
What is KC certification? The KC (Korea Certification) certification mark signifies compliance with Korea’s product safety requirements for electrical and electronic equipment and components that utilise power from AC 50-1000V. The KC certification procedure for products includes the following steps: 1. Application - The application process involves the submission of an application form and product description. In addition, the manufacture must obtain a certificate of registration. 2. Factory inspection - Production equipment and processes are inspected and audited for compliance with applicable safety criteria. 3. Product testing - The product is tested consistent with the requirements of the applicable safety standard(s). 4. EMC testing - The product is tested for electromagnetic compatibility (EMC) and immunity. 5. Post-certification surveillance - Regular factory inspections and market surveillance are required to verify continued compliance following cer...
자세한 내용 보기

신기술로 인해 배터리가 코발트에서 분리 될 수 있습니다. Posted by batterymanufactory.com

이미지
Lithium-based batteries use more than 50 percent of all cobalt produced in the world. These batteries are in your cell phone, laptop and maybe even your car. About 50 percent of the world's cobalt comes from the Congo, where it's largely mined by hand, in some instances by children. But now, a research team led by scientists at the University of California, Berkeley, has opened the door to using other metals in lithium-based batteries, and have built cathodes with 50 percent more lithium-storage capacity than conventional materials. "We've opened up a new chemical space for battery technology," said senior author Gerbrand Ceder, professor in the Department of Materials Science and Engineering at Berkeley. "For the first time we have a really cheap element that can do a lot of electron exchange in batteries." The study will be published in the April 12 edition of the journal Nature. The work was a collaboration between scientists at...
자세한 내용 보기