기본 콘텐츠로 건너뛰기

리튬 배터리 FAQ (3). Posted by batterymanufactory.com

(1). How many charging ways are there for rechargeable batteries ?

Ni-Cd and Ni-MH battery charging method:
   1 constant current charging: the charging current throughout the charging process for a certain value, this method is the most common;
   2. Constant voltage charging: the charging voltage across the charging process to maintain a constant voltage, the current in the circuit with the battery voltage increases and gradually decreases.
   3. Constant current and constant voltage charging: The battery is first charged with a constant current. When the battery voltage rises to a certain value, the voltage remains unchanged, the current in the circuit drops to a very small value, and finally tends to zero.

 리튬 배터리

 Lithium battery charging method:
Constant current and constant voltage charging: The battery is charged first with a constant current. When the battery voltage rises to a certain value, the voltage remains unchanged, the current in the circuit drops to a very small value, and finally tends to zero.

(2). what is the standard battery charge and discharge ?

IEC international standards for nickel-cadmium and nickel-metal hydride batteries standard charge and discharge method is:
First, the battery discharge to 1.0V / 0.2C 0.2C, and then charged at 0.1C 16 hours, set aside for 1 hour to 0.2C to 1.0V / support, is the standard battery charge and discharge.

(3). pulse charging on battery performance have any effect ?

Because nickel-cadmium batteries are easily polarized during normal charging, conventional constant voltage or constant current charging causes the electrolyte to continuously generate hydrogen gas. Under the action of internal high pressure, oxygen permeates the negative electrode to react with the cadmium plate to generate CdO, The effective capacity is reduced .Pulse charging is generally used charge and discharge method .Full charge for 5 seconds, put a banknote clock .In this way, the oxygen generated during the discharge process will be most of the reduced voltage will be reduced to electrolyte .Not only limits the internal electrolysis Liquid gasification, but also for those who have serious polarization of the old batteries, using the charging method of charging and discharging 5-10 times, will gradually restore or close to the original capacity.

(4). what is trickle charge ?

Trickle charge is used to make up the battery after the full charge due to self-discharge caused by the loss of capacity.Generally used pulse current charging to achieve the above purpose.According to the experience of the past tests, the battery is fully charged, at 40 ℃ environment due to self Discharge loss capacity is about 5% of the nominal capacity. Theoretically, continuous charging at a current of C / 500 can make up for the capacity loss due to self-discharge C * 5/100 * 24h * C / 500. However, The current is too small, in fact, the charging efficiency is very low, so basically can not charge into the electricity. We use pulse charging method can solve this problem .Care for 1.2 seconds with C / 10, set aside 58.8 seconds.According to the above conditions, Weigh capacity of 5%. In general, the pulse charging method in the following range is more suitable, can be selected according to the actual situation. Charging current: C / 20, charging time: 0.1 seconds to 60 seconds.
Trickle charge example:
Charge High Charge Low Pulse Cycle S Daily Charge Capacity Current Time Current Time C / 10 1.2s 0C 58.8s 60s 5% of Standard Capacity 2.4s 0C 57.6s 60s C / 10 0.6s 0C 29.4s 30s

(5). what is charging efficiency ?

Refers to the battery under certain discharge conditions to a certain cut-off voltage release capacity and input battery capacity ratio, which can be calculated according to the following formula:
Charging efficiency = (discharge current × discharge to off voltage / charge current × charge time) × 100%
Part of the energy input is used to convert the active material into a charge state, which is partially consumed by side reactions to generate oxygen. The charging efficiency is affected by the charge rate and the ambient temperature. The charging current must be within a certain range during charging, and the current is too small or too large The charging efficiency is very low, due to self-discharge of the battery there, resulting in the battery can not be fully charged.

Tags:

Posted in 자주 묻는 질문 | 중국 리튬 폴리머 배터리 제조 업체, 리튬 이온 배터리, RC 사러 배터리 팩, 한 LiFePO4 배터리 팩 By

batterymanufactory.com

 

BENZO 에너지 과학 기술 유한 회사



전화 번호   전화 번호：+86-755-84822012
전화 번호   전화 번호：+86-13538185686

E 메일   E 메일: contact@benzobattery.com
skype  Skype: benzobattery1231@gmail.com

사무실 주소   사무실 주소：  廣東省深圳市龍崗區阪田和成世紀名園
공장 주소   공장 주소：  廣東省東莞市清溪鎮羅馬路漢通科技園B1棟

         사이트：   bz-battery.en.alibaba.com   /   www.bz-battery.com

 

댓글

댓글 쓰기

이 블로그의 인기 게시물

스마트폰을 위한 어떤 종류의 배터리가 더 좋은가요? Li-Ion 또는 LiPo?

이미지
Did you ever think about why your phone works at all? Probably not. But, if you think about it, all portable gadgets rely on a battery to keep ticking – and some have better battery life than others. That’s why we’re going to take a peek at what keeps your phone ticking and why some batteries do better than others. On the basis of chemistry used for ions carrying electrolyte material, Lithium battery can be classified into Lithium ion and lithium Polymer. Lithium ion battery uses liquid lithium ion as electrolyte while lithium polymer use solid or gelatin like polymers as electrolyte. Lithium ion batteries have high energy density and cost less than lithium polymer. Lithium polymer batteries are light weight and have improved safety . However their cost is high (30% average) as compared to lithium ion. Also the the energy density of Li-Polymer battery compared to Li-Ion Batteries is quite less. Lithium ion batteries tend to lose charge with ageing even when not us...
자세한 내용 보기

What is KC certification? What are the requirements for the factory to pass the KC certification? Posted by batterymanufactory.com

이미지
What is KC certification? The KC (Korea Certification) certification mark signifies compliance with Korea’s product safety requirements for electrical and electronic equipment and components that utilise power from AC 50-1000V. The KC certification procedure for products includes the following steps: 1. Application - The application process involves the submission of an application form and product description. In addition, the manufacture must obtain a certificate of registration. 2. Factory inspection - Production equipment and processes are inspected and audited for compliance with applicable safety criteria. 3. Product testing - The product is tested consistent with the requirements of the applicable safety standard(s). 4. EMC testing - The product is tested for electromagnetic compatibility (EMC) and immunity. 5. Post-certification surveillance - Regular factory inspections and market surveillance are required to verify continued compliance following cer...
자세한 내용 보기

신기술로 인해 배터리가 코발트에서 분리 될 수 있습니다. Posted by batterymanufactory.com

이미지
Lithium-based batteries use more than 50 percent of all cobalt produced in the world. These batteries are in your cell phone, laptop and maybe even your car. About 50 percent of the world's cobalt comes from the Congo, where it's largely mined by hand, in some instances by children. But now, a research team led by scientists at the University of California, Berkeley, has opened the door to using other metals in lithium-based batteries, and have built cathodes with 50 percent more lithium-storage capacity than conventional materials. "We've opened up a new chemical space for battery technology," said senior author Gerbrand Ceder, professor in the Department of Materials Science and Engineering at Berkeley. "For the first time we have a really cheap element that can do a lot of electron exchange in batteries." The study will be published in the April 12 edition of the journal Nature. The work was a collaboration between scientists at...
자세한 내용 보기