기본 콘텐츠로 건너뛰기

리튬 배터리 용 터보차저. Posted by batterymanufactory.com

Lithium-ion batteries are the ultimate benchmark when it comes to mobile phones, tablet devices, and electric cars. Their storage capacity and power density are far superior to other rechargeable battery systems. Despite all the progress that has been made, however, smartphone batteries only last a day and electric cars need hours to be recharged. Scientists are therefore working on ways to improve the power densities and charging rates of all-round batteries. "An important factor is the anode material," explains Dina Fattakhova-Rohlfing from the Institute of Energy and Climate Research (IEK-1).

리튬 배터리


"In principle, anodes based on tin dioxide can achieve much higher specific capacities, and therefore store more energy, than the carbon anodes currently being used. They have the ability to absorb more lithium ions," says Fattakhova-Rohlfing. "Pure tin oxide, however, exhibits very weak cycle stability -- the storage capability of the batteries steadily decreases and they can only be recharged a few times. The volume of the anode changes with each charging and discharging cycle, which leads to it crumbling."

One way of addressing this problem is hybrid materials or nanocomposites -- composite materials that contain nanoparticles. The scientists developed a material comprising tin oxide nanoparticles enriched with antimony, on a base layer of graphene. The graphene basis aids the structural stability and conductivity of the material. The tin oxide particles are less than three nanometres in size -- in other words less than three millionths of a millimetre -- and are directly "grown" on the graphene. The small size of the particle and its good contact with the graphene layer also improves its tolerance to volume changes -- the lithium cell becomes more stable and lasts longer.

Three times more energy in one hour

"Enriching the nanoparticles with antimony ensures the material is extremely conductive," explains Fattakhova-Rohlfing. "This makes the anode much quicker, meaning that it can store one-and-a-half times more energy in just one minute than would be possible with conventional graphite anodes. It can even store three times more energy for the usual charging time of one hour."

"Such high energy densities were only previously achieved with low charging rates," says Fattakhova-Rohlfing. "Faster charging cycles always led to a quick reduction in capacity." The antimony-doped anodes developed by the scientists, however, retain 77 % of their original capacity even after 1,000 cycles.

"The nanocomposite anodes can be produced in an easy and cost-effective way. And the applied concepts can also be used for the design of other anode materials for lithium-ion batteries," explains Fattakhova-Rohlfing. "We hope that our development will pave the way for lithium-ion batteries with a significantly increased energy density and very short charging time."

Tags:

Posted in News | 중국 리튬 폴리머 배터리 제조 업체, 리튬 이온 배터리, RC 사러 배터리 팩, 한 LiFePO4 배터리 팩 By

batterymanufactory.com

 

 BENZO 에너지 과학 기술 유한 회사



전화 번호   전화 번호：+86-755-84822012
전화 번호   전화 번호：+86-13538185686

E 메일   E 메일: enzo@batterymanufactory.com
skype  Skype: benzobattery1231@gmail.com

사무실 주소   사무실 주소：  廣東省深圳市龍崗區阪田和成世紀名園
공장 주소   공장 주소：  廣東省東莞市清溪鎮羅馬路漢通科技園B1棟

         사이트：   bz-battery.en.alibaba.com   /   www.bz-battery.com

 

댓글

댓글 쓰기

이 블로그의 인기 게시물

스마트폰을 위한 어떤 종류의 배터리가 더 좋은가요? Li-Ion 또는 LiPo?

이미지
Did you ever think about why your phone works at all? Probably not. But, if you think about it, all portable gadgets rely on a battery to keep ticking – and some have better battery life than others. That’s why we’re going to take a peek at what keeps your phone ticking and why some batteries do better than others. On the basis of chemistry used for ions carrying electrolyte material, Lithium battery can be classified into Lithium ion and lithium Polymer. Lithium ion battery uses liquid lithium ion as electrolyte while lithium polymer use solid or gelatin like polymers as electrolyte. Lithium ion batteries have high energy density and cost less than lithium polymer. Lithium polymer batteries are light weight and have improved safety . However their cost is high (30% average) as compared to lithium ion. Also the the energy density of Li-Polymer battery compared to Li-Ion Batteries is quite less. Lithium ion batteries tend to lose charge with ageing even when not us...
자세한 내용 보기

What is KC certification? What are the requirements for the factory to pass the KC certification? Posted by batterymanufactory.com

이미지
What is KC certification? The KC (Korea Certification) certification mark signifies compliance with Korea’s product safety requirements for electrical and electronic equipment and components that utilise power from AC 50-1000V. The KC certification procedure for products includes the following steps: 1. Application - The application process involves the submission of an application form and product description. In addition, the manufacture must obtain a certificate of registration. 2. Factory inspection - Production equipment and processes are inspected and audited for compliance with applicable safety criteria. 3. Product testing - The product is tested consistent with the requirements of the applicable safety standard(s). 4. EMC testing - The product is tested for electromagnetic compatibility (EMC) and immunity. 5. Post-certification surveillance - Regular factory inspections and market surveillance are required to verify continued compliance following cer...
자세한 내용 보기

신기술로 인해 배터리가 코발트에서 분리 될 수 있습니다. Posted by batterymanufactory.com

이미지
Lithium-based batteries use more than 50 percent of all cobalt produced in the world. These batteries are in your cell phone, laptop and maybe even your car. About 50 percent of the world's cobalt comes from the Congo, where it's largely mined by hand, in some instances by children. But now, a research team led by scientists at the University of California, Berkeley, has opened the door to using other metals in lithium-based batteries, and have built cathodes with 50 percent more lithium-storage capacity than conventional materials. "We've opened up a new chemical space for battery technology," said senior author Gerbrand Ceder, professor in the Department of Materials Science and Engineering at Berkeley. "For the first time we have a really cheap element that can do a lot of electron exchange in batteries." The study will be published in the April 12 edition of the journal Nature. The work was a collaboration between scientists at...
자세한 내용 보기