기본 콘텐츠로 건너뛰기

새로운 디자인 덕분에 'Workhorse 리튬 배터리가 더 강력해진 수 있습니다. Posted by batterymanufactory.com

Cornell University chemical engineering professor Lynden Archer believes there needs to be a battery technology "revolution" -- and thinks that his lab has fired one of the first shots.

더 강력한 리튬 배터리

"What we have now [in lithium-ion battery technology] is actually at the limits of its capabilities," said Archer. "The lithium-ion battery, which has become the workhorse in powering new electronics technologies, operates at over 90 percent of its theoretical storage capacity. Minor engineering tweaks may lead to better batteries with more storage, but this is not a long-term solution."

"You need a kind of radical mindset change," he said, "and that means that you've got to almost start at the beginning."

Snehashis "Sne" Choudhury, Ph.D. '18, has come up with what Archer terms an "elegant" solution to a fundamental problem with rechargeable batteries that use energy-dense metallic lithium anodes: sometimes-catastrophic instability due to dendrites, which are spines of lithium that grow from the anode as ions travel back and forth through the electrolyte during charge and discharge cycles.

If the dendrite breaks through the separator and reaches the cathode, short-circuiting and fire can occur. Solid electrolytes have been shown to suppress dendrite growth mechanically, but at the expense of fast ion transport. Choudhury's solution: Confine dendrite growth by the structure of the electrolyte itself, which can be controlled chemically.

Using a reaction procedure the Archer group introduced in 2015, they employ "cross-linked hairy nanoparticles" -- a graft of silica nanoparticles and a functionalized polymer (polypropylene oxide) -- to create a porous electrolyte that effectively lengthens the route ions must take to travel from the anode to the cathode and back, dramatically increasing the life of the anode.

Their paper, "Confining Electrodeposition of Metals in Structured Electrolytes," was published in Proceedings of the National Academy of Sciences. Choudhury and Dylan Vu -- a rising junior majoring in chemical engineering -- are co-first authors.

Choudhury, who is headed to Stanford University for his postdoctoral work, also devised a method for direct visualization of the inner workings of their experimental battery. The group confirmed theoretical predictions about dendrite growth with Choudhury's device.

"This is something I've wanted to do for, I guess, three Ph.D. students' lifetimes," said Archer, who's been at Cornell since 2000, with a laugh. "What Sne was able to do was design a cell that allowed us to, very elegantly, visualize what is occurring at the lithium-metal interface, giving us now the ability to go beyond theoretical predictions."

Another novelty of this work, Archer said, is "overturning something of a canon" in battery science. It's long been held that, in order to suppress dendrite growth, the separator inside the battery must be stronger than the metal it is trying to suppress, but Choudhury's porous polymer separator -- with average pore sizes below 500 nanometers -- were shown to arrest the growth.

Tags:

Posted in News | 중국 리튬 폴리머 배터리 제조 업체, 리튬 이온 배터리, RC 사러 배터리 팩, 한 LiFePO4 배터리 팩 By

batterymanufactory.com

 

 BENZO 에너지 과학 기술 유한 회사



전화 번호   전화 번호：+86-755-84822012
전화 번호   전화 번호：+86-13538185686

E 메일   E 메일: enzo@batterymanufactory.com
skype  Skype: benzobattery1231@gmail.com

사무실 주소   사무실 주소：  廣東省深圳市龍崗區阪田和成世紀名園
공장 주소   공장 주소：  廣東省東莞市清溪鎮羅馬路漢通科技園B1棟

         사이트：   bz-battery.en.alibaba.com   /   www.bz-battery.com

 

댓글

댓글 쓰기

이 블로그의 인기 게시물

스마트폰을 위한 어떤 종류의 배터리가 더 좋은가요? Li-Ion 또는 LiPo?

이미지
Did you ever think about why your phone works at all? Probably not. But, if you think about it, all portable gadgets rely on a battery to keep ticking – and some have better battery life than others. That’s why we’re going to take a peek at what keeps your phone ticking and why some batteries do better than others. On the basis of chemistry used for ions carrying electrolyte material, Lithium battery can be classified into Lithium ion and lithium Polymer. Lithium ion battery uses liquid lithium ion as electrolyte while lithium polymer use solid or gelatin like polymers as electrolyte. Lithium ion batteries have high energy density and cost less than lithium polymer. Lithium polymer batteries are light weight and have improved safety . However their cost is high (30% average) as compared to lithium ion. Also the the energy density of Li-Polymer battery compared to Li-Ion Batteries is quite less. Lithium ion batteries tend to lose charge with ageing even when not us...
자세한 내용 보기

What is KC certification? What are the requirements for the factory to pass the KC certification? Posted by batterymanufactory.com

이미지
What is KC certification? The KC (Korea Certification) certification mark signifies compliance with Korea’s product safety requirements for electrical and electronic equipment and components that utilise power from AC 50-1000V. The KC certification procedure for products includes the following steps: 1. Application - The application process involves the submission of an application form and product description. In addition, the manufacture must obtain a certificate of registration. 2. Factory inspection - Production equipment and processes are inspected and audited for compliance with applicable safety criteria. 3. Product testing - The product is tested consistent with the requirements of the applicable safety standard(s). 4. EMC testing - The product is tested for electromagnetic compatibility (EMC) and immunity. 5. Post-certification surveillance - Regular factory inspections and market surveillance are required to verify continued compliance following cer...
자세한 내용 보기

신기술로 인해 배터리가 코발트에서 분리 될 수 있습니다. Posted by batterymanufactory.com

이미지
Lithium-based batteries use more than 50 percent of all cobalt produced in the world. These batteries are in your cell phone, laptop and maybe even your car. About 50 percent of the world's cobalt comes from the Congo, where it's largely mined by hand, in some instances by children. But now, a research team led by scientists at the University of California, Berkeley, has opened the door to using other metals in lithium-based batteries, and have built cathodes with 50 percent more lithium-storage capacity than conventional materials. "We've opened up a new chemical space for battery technology," said senior author Gerbrand Ceder, professor in the Department of Materials Science and Engineering at Berkeley. "For the first time we have a really cheap element that can do a lot of electron exchange in batteries." The study will be published in the April 12 edition of the journal Nature. The work was a collaboration between scientists at...
자세한 내용 보기